Instruction manual

- ix -
Fabric retainer
If the edge of the fabric is curled or it is raised, the fabric retainer can be used to avoid contact
of the fabric and ink head.
The fabric retainer can be adjusted thickness of up to 4 mm and 3-7 mm.
Ditch for penetrated ink
Even with printing to a coarse-textured fabric, the backing fabric is not stained by penetrated ink.
Removable platen boards are prepared for fabrics without ink penetration.
Slip sheet can be used
One set of slip sheet bar and its hanger is equipped as standard.
It can be used for slip sheet between fabric with take-up unit to prevent ink penetration.
Function of feed-correction
Feed correction can be performed during plotting operation.
Centering (anti-meandering) mechanism
Stable fabric feed and printing are possible even if the edge of the set roll fabric is not
aligned.