Instruction manual

– 4.10 –
If “Y Single” has been selected )
Input the correction value for the Y out-going
travel using the
or key.
Enter the correction values between heads 1 and
2, between heads 1 and 3, between heads 1 and 4,
between heads 1 and 5, and between colors 1 and
6.
If “Y Repeat” has been selected )
Input the correction value for the Y in-coming
travel using the
or key.
Enter the correction values between heads 1 and
2, between heads 1 and 3, between heads 1 and 4,
between heads 1 and 5, and between colors 1 and
6.
If “Y Bi-D” has been selected )
Input the correction value for the Y going-and-
coming travel using the
or key.
Enter the correction value between heads 1 and
1.
If “FINAL” has been selected )
Enter the correction value with the
ENTER
key.
X PRINT : Heads 1-3, 1-5
Y SINGLE : Heads 1-2, 1-3, 1-4, 1-5, 1-6
Y REPEAT : Heads 1-2, 1-3, 1-4, 1-5, 1-6
Y BI-D : Heads 1-1
Usually, processing is completed by plotting a
pattern for checking adjustment result for each
item.
When you press the
ENTER
key, enter the
correction value of above items.
Press the
key to exit from the
function.
#PRN. adjust2
Y Si. 1-2 : 0.0
#PRN. adjust2
Y Re. 1-2 : 0.0
#PRN. adjust2
Y Bi. 1-1 : 0.0
#PRN. adjust2
FINAL. 1-3 :