Instruction manual

– 4.71 –
PARAM. DRAW
ALL PATTERN.
X SERVO
Y SERVO
XY SERVO
ACTION TEST
SENSOR TEST
PAPER sensor
KEYBOARD
DISPLAY test
LCD TEST
PUMP MOTOR
TIMER check
MEMORY check
SKEW CHECK
TEMP CHECK
ENCODER
#PARAMETER
SYSTEM PRM Total 64 items ................ Refer to “4-5-1. SYSTEM PRM”
INK PARAMETER1 Total 80 items ................ This is not used in the field.
INK PARAMETER2 Total 100 items .............. This is not used in the field.
MENT PARAMETER Total 96 items ................ This is not used in the field.
SERVO PARAMETER Total 64 items ................ This is not used in the field.
ADJ PARAMETER Total 25 items ................ This is not used in the field.
INFO PARAMETER Total 96 items ................ This is not used in the field.
SYSTEM PRM
INK PRM.1
INK PRM.2
MAINTE PRM
SERVO PRM
ADJUST PRM
INFO PRM
No selective item
No selective item
No selective item
No selective item
FAN MOTOR
Y CUTTER
COOLING FAN
ROLL MOTOR
SET LEVER
REAR PAPER
Y-ORIGIN
CAPPING
STATION
WIPER
FRONT COVER
X-ORIGIN
INK END TEST
INK PACK TEST
No selective item
No selective item
No selective item
No selective item
PUMP. 1,2,3,4
Dir
STEPcnt
STEP.pps
DATE
TIME
SDRAM
S–RAM
F–ROM
I/F S–RAM
No selective item
Ta1-6, Tj1A-Tj6A, Tj1B-Tj6B
No selective item