Instruction manual

– 4.44 –
7) Press the
key.
The state of the station cover sensor is shown
on the LCD.
ON: The station cover has been opened.
OFF: The station cover has not been closed.
8) Press the
key.
The state of the wiping sensor is shown on the
LCD.
ON: Wiper FAR
OFF: Wiper NEAR
9) Press the
key.
The state of the front cover sensor is shown on
the LCD.
ON: The front cover has been opened.
OFF: The front cover has not been closed.
10) Press the
key.
The state of the X-origin sensor is shown on
the LCD.
ON: Origin has been detected.
OFF: Origin has not been detected.
11) Press the
key.
Current status of ink pack sensor is displayed.
The color codes of the cartridges that have run
out of ink are appear.
12) Press the
key.
Current status of ink end sensor is displayed.
The color codes of the cartridges that have run
out of ink are appear.
Press the
key in repetition to return the layers
of screens one by one.
13) Press the key to exit from the
function.
Press the
ENTER
key to start the initial
operation.
# SENSOR TEST
STATION : OFF
# SENSOR TEST
WIPER : OFF
# SENSOR TEST
FRONT COVER : OFF
# SENSOR TEST
X-ORIGIN : OFF
# INK PACK TEST
# INK END TEST