Specifications

3 Printing
3-12
Setting cut sheet media on the printer
Unlike roll media, cut sheet media need not be retained with the roll holders.
STEPS:
1 Open the front cover and raise the clamp lever.
2 Insert the cut sheet media between the platen and the pinch rollers.
3 Hold the media with the media press lightly, not to be lifted the media.
 Take care not to set cut sheet media skew.
 Make setting so that the suction hole at the right end of the platen is covered
with the right end of the madia, and adjust the position of the roll holder.
Pinch roller
Platen
Rightmost pinch roller
Suction hole
Media press
Media end