Specifications

2-33
About Function Menus
CART.PRIORITY (p. 3-49) INK LEVEL, EXP. DATE Set the cartridge status to use first in
the double cartridge automatic
switching function.
Test Draw Arrange (p. 6-25) FEED Dir, SCAN Dir. Set the arrange direction of the test
pattern to be drawn when perform-
ing test drawing repeatedly.
MEDIA DETECT
(p. 6-11)
ThicknessDETECT AUTO, MANUAL Set how to detect media thickness
performed prior to the detection of
media width.
FEED ERR. DETECT ON, OFF Set how to detect the end of media
when using roll media.
MACHINE NAME (p. 6-25) 01 to 99 When the printer is connected
through the USB 2.0 interface to a
system to which two or more
machines are connected, set the
identifier of the printer to have the
system recognize it.
ENV. TEMP. (p. 3-45) Not wait ARR., Wait arrival Set the operation when drawing was
tried to start with the temperature of
the place where this machine has
been installed being outside the
range of usable temperature.
INFORMATION ERROR HISTORY (p. 6-26)
(Can be selected directly by pressing
[INFORMATION] key.)
Displays error history information
up to now by selecting from [ALL],
[ONLY ERROR] or [ONLY
WARNING].
Two or more errors, if any, can be
displayed in turn by pressing the
[] or [] key.
Display various information.
The items in [INFORMATION] can
be set individually by pressing the
[INFORMATION] key.
MAINTE. HISTORY (p. 6-26)
(Can be selected directly by pressing
[INFORMATION] key.)
Displays the records of the mainte-
nance function that have been exe-
cuted up to now.
Two or more records, if any, can be
displayed in turn by pressing the
[] or [] key.
PRT.modeHISTORY (p. 6-26)
(Can be selected directly by pressing
[INFORMATION] key.)
Displays the history of information
(printing conditions) of the online
printing that has been performed up
to now.
Two or more pieces of information,
if any, can be displayed in turn by
pressing the [] or [] key.
LIST (p. 6-27)
(Can be selected directly by pressing
[INFORMATION] key.)
Ink REPL. report (p. 6-27)
(Can be selected directly by pressing
[INFORMATION] key.)
VERSION (p. 6-27)
(Can be selected directly by pressing
[INFORMATION] key.)
Serial&DealerNo
(p. 6-27)
(Can be selected directly by pressing
[INFORMATION] key.)
Function name Sub function Setting value Function