Specifications

2 Before Use
2-32
MACHINE SET functions
Function name Sub function Setting value Function
DRY & EXHST.
FAN (p. 6-20)
DRYNESS FAN STOP TIME 0 to 240 Min, CONTINUE Set the operation of the dryness fan.
[STOP TIMER] sets the time from
the completion of the printing to the
stopping of the rotation of the fan.
[RENEW] switches over the current
status of the fan.
RENEW ON, OFF
Outside EXHST
Displays about dry-
ness fan interlock if
it is interlocked.
Press [FUNC-
TION] key to
switch to indepen-
dent operation, and
to set items on the
right.
STOP TIME 0 to 240 Min, CONTINUE Set the operation of the outside
exhaust fan.
[STOP TIMER] sets the time from
the completion of the printing to the
stopping of the rotation of the fan.
[RENEW] switches over the current
status of the fan.
[SETUP INTERLOCK] interlocks
the operation to the dryness fan.
RENEW ON, OFF
SETUP INTER-
LOCK
Built-in EXHST
Displays about dry-
ness fan interlock if
it is interlocked.
Press [FUNC-
TION] key to
switch to indepen-
dent operation, and
to set items on the
right.
STOP TIME 0 to 240 Min, CONTINUE Set the operation of the built-in
exhaust fan.
[STOP TIMER] sets the time from
the completion of the printing to the
stopping of the rotation of the fan.
[RENEW] switches over the current
status of the fan.
[SETUP INTERLOCK] interlocks
the operation to the dryness fan.
RENEW ON, OFF
SETUP INTER-
LOCK
DRYNESS FEED (p. 6-21) ON, OFF Change the feed operation after
printing.
CONFIRM. FEED
(p. 6-22)
ON
Press [FUNC-
TION] key to set
items on the right.
BACK FEED ON, OFF Set whether or not to perform feed-
ing the media after test printing for
checking of the printing result.
OFF
PRE-FEED
METHOD
(p. 6-22)
[Only when dedi-
cated sublimation
transfer ink is used.]
FORE (**mm)
Press [FUNC-
TION] key to set
items on the right.
LENGTH 10mm to 1000mm Switches the pre-feed operation.
FORE&BACK
HEATER SETUP (p. 6-22) STD, set -5°C, set -10°C, set -15°C,
set -20°C
Change the temperature range of the
post-heater that determines whether
the temperature is reached.
MEDIA CUT
(p. 6-22)
ASSIGN CUT KEY ON, OFF Allocate [>] key to DIRECT CUT
key of MEDIA CUT.
MOVE.DROP MEDIA ON, OFF
Switch the dropping operation of the
media after cutting media.
TIME SET (p. 6-23) ON, OFF Set the date and time on the printer.
UNIT SETUP
(p. 6-23)
TEMP. °C or °F Change the units of temperature,
length and area to be used with the
printer.
LENGTH mm or inch
STAMP SETUP (p. 6-24) ON, OFF Make settings for outputting the date
and time and printing conditions
after printing.