Specifications

2 Before Use
2-28
VACUUM
(p. 6-10)
STRONG,
STANDARD,
Little WEAK,
WEAK
Press [FUNC-
TION] key to set
items on the right.
STOP TIMER 0 - 60 min, CONTINUE Sets the absorbability of the media.
Also sets the time to stop the vac-
uum fan after printing.
OFF Media is not vacuumed.
PRIORITY
(p. 6-10)
ALL HOST Sets the priority of settings (host /
panel).
ALL PANEL
INDIVIDUALLY MEDIA COMP., HEATER, PRINT
MODE, INK LAYERS, DRYING
TIME, AUTO CUT, PRE-FEED,
MARGIN, COLOR PATTERN,
REFRESH, VACUUM, FD.SPEED,
FD.METHOD
AUTO CLEAN-
ING (p. 3-37)
ON
Press [FUNC-
TION] key to set
items on the right.
CLEANING
INTERVAL
10 to 10000 mm Cleans the print heads automatically
every completion of printing.
CLEANING
TYPE
SOFT, NORMAL, HARD
OFF
Print. MAINTE.
(p. 3-39)
[Only when dedi-
cated sublimation
transfer ink is used.]
CLEANING
Press [FUNC-
TION] key to set
items on the right.
CLEANING
INTERVAL
0.1 to 100.0 mm Cleans the print heads automatically
every completion of printing.
CLEANING
TYPE
SOFT, NORMAL, HARD
WIPING
Press [FUNC-
TION] key to set
items on the right.
SCAN COUNT 10 to 9990 times The heads are automatic wiped
while printing.
OFF
HEAD GAP (p. 3-5) 1.5 to 7.0 mm Sets the head gap (height from the
media to the nozzle plane of the
heads).
MEDIA DETECT
(p. 6-11)
DETECT METHOD SELECT Sets the method for detecting the
media.
WIDTH
CUTTING DETECT BOTH EDGE, LEFT EDGE,
RIGHT EDGE, NONE
SETUP RESET Resets the setting values to the
default values.
Function name Sub function Setting value Function