Specifications

2 Before Use
2-20
Modes and Menu Screens
Modes
This printer is provided with the following four modes:
NOT-READY mode
This is the mode in which the media has not been detected yet.
The keys other than the [REMOTE] key and the [TEST DRAW] key are effective.
LOCAL mode
The printer enters this mode when the media has been detected.
All the keys are effective.
The printer can receive data from the computer. However, it does not perform printing.
This mode permits the following operations:
 Pressing the appropriate [JOG] keys to detect the media or set the origin.
 Pressing the [FUNCTION] key to set functions. (FUNCTION mode)
 Pressing the [REMOTE] key to switch between [REMOTE mode] and [LOCAL mode].
 Pressing the [ENTER] key to check the remaining amount of ink, the description of the cartridge error,
the model name, the firmware version, and so on.
 Pressing the [TEST DRAW] key to print a test pattern and checking to see if there is no faulty print.
 Pressing the [DATA CLEAR] key to erase the printing data the printer has received.
 Pressing the [CLEANING] key to execute the cleaning of the heads.
 Pressing the [USER TYPE] key to change the user type.
 Pressing the [ST.MAINT] key to activate directly [ST.MAINTENANCE], one of the [MAINTE-
NANCE] functions.
 Pressing the [INFORMATION] key to activate directly [INFORMATION] of the [MACHINE SETUP]
function.
 Pressing the [FEED COMP.] key to activate directly [MEDIA COMP.].
 Pressing the [HEATER] key to set the temperature of the heaters.
 Pressing the [HEAT SW] key to turn on/off the power to the heaters.
REMOTE mode
The printer prints the data it receives.
Pressing the [REMOTE] key during printing interrupts the printing temporarily and returns the printer to
LOCAL mode.
FUNCTION mode
To set FUNCTION mode, press the [FUNCTION] key when the printer is in LOCAL mode.
In this mode, printing conditions can be set.