Specifications

2-11
Configurations and Functions
Cutter blade and cutting line
The carriage is provided with a cutter unit for cutting off the media that has been printed on.
The cutter cuts off the sheet of media along the cutting line on the platen. (Refer to “Cutting the media
after completion of printing (p.3-35)” ) , (Refer to “AUTO CUT (p.6-9)” )
Media sensor
The media sensor detects the presence of the media and the media length.
This printer has media sensor on the platen (in the rear).
 Set the media so that media sensor located in the rear of the platen is covered
with the media without fail. The media can not be detected unless it is placed
over the sensor.
Cutter blade
Cutting line
Cutter unit
Media sensor
Platen