Specifications

1-19
Basic specifications
*1 Without deflection of the roll when it is retained at both ends.
*2 Main unit and heater
Head height adjustment Can be set by user steplessly in the range of 1.5 mm to 7 mm (media thickness is automati-
cally recognized)
Cutting of media Cutting of Y direction by the head cutter,
Cutting accuracy (steps) : 0.5 mm or less.
Media delivery Take-up device supplied as a standard accessory (switching possible between take-up with
print side inside and take-up with print side outside), which can be used only with a 3-inch
core
Waste ink tank Bottle type ( 4,000 cc)
FULL state is detected with sensor
Interface USB 2.0
Command MRL-III
Noise during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous printing Less than 65 dB
during discontinuous printing Less than 70 dB
Nozzle check unit Laser beam type (CLASS 1 or below)
Safety Standard VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC, ), CB Report, RoHS, CLASS
1 Laser
Power AC 200 - 240 V ± 10%, 50/60 Hz ± 1 Hz 15A or less
Power consumption *2 3600 VA or less
Recomended Environment Available temp. 20 °C to 35 °C
Humidity 35 to 65 % Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C
Temperature change ± 10 °C / h or less
Dust Equivalent to normal office level
Weight Main unit 398 kg or less
Outside dimensions Width 3120 mm
Depth 850 mm
Height 1540 mm
Item Specifications