Specifications

6-15
Moving the printer safely [BeforeMovingIt.]
Use this function to lock the station when the printer is to be moved.
Use this function when the printer is to be moved in such a way that some vibration is expected.
However, when the printer is to be moved, be sure to contact your dealer or an office of MIMAKI.
STEPS:
1 Make sure that the printer is in LOCAL mode, and then select [MAINTENANCE] using
the [FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key once.
2 Select [BeforeMovingIt.] by pressing the [] key 10 times and press the [ENTER] key.
3 Make preparation for moving the printer.
When preparation has been made, press the [ENTER] key.
4 Press the power button in the front.
The lamp on the power switch is put off.
 Move the printer with the level adjusters of the take-up device in the raised
position.
L. ∗ >
width : ∗∗∗∗ mm
FUNCTION
MAINTENANCE <ENT>
MAINTENANCE
ST.MAINTENANCE <ent>
MAINTENANCE
BeforeMovingIt. <ent>
10
times
ThePreparation which
a device is moved to
BeforeMovingIt.
START : ent
∗ PLEASE POWER-OFF ∗
BeforeMovingIt.
∗∗ COMPLETED ∗∗