Specifications

6-3
List of functions
This section describes briefly the setup functions and their setting values.
Name Function Refer to
MEDIA COMP. Corrects the feed rate of media p. 6-5
MediaFeed SETUP Set particulars related to media feed. p. 6-5
HEATER Sets heater conditions p. 6-5
PRINT MODE Sets a print quality level and printing direction p. 6-6
INK LAYERS Sets the number of layers in which ink is to be applied p. 6-8
DRYING TIME Sets the time to wait for ink drying p. 6-8
AUTO CUT Cuts the media automatically after printing p. 6-9
PRE-FEED Feeds the media back and forth before printing p. 6-9
MARGIN Sets a non-printing area along the right and left edges of the media p. 6-9
COLOR PATTERN Prints a color pattern on the right edge of the media to check nozzle missing p. 6-9
REFRESH Refreshes the print heads during printing p. 6-10
VACUUM Sets the absorbability of the media. p. 6-10
PRIORITY Sets the priority of settings (host / panel) p. 6-10
AUTO CLEANING Cleans the print heads automatically every completion of printing p. 6-10
Print. MAINTE
*1
*1. Only when dedicated sublimation transfer ink is used, [Print. MAINTE.] can be set.
Automatically cleans or wipes the heads regularly while printing. p. 6-11
HEAD GAP Sets the head gap (height from the media to the nozzle plane of the heads). p. 6-11
MEDIA DETECT Sets the method for detecting the media p. 6-11
SETUP RESET
*2
*2. Each item excluding [SETUP RESET] can be registered on the type.
Resets the setting values to the default values
p. 6-11