Specifications

5-17
Troubles for which error messages are displayed
Expiration:1MONTH
- - - - - - - - - - - - - - - -
The expiration date of an ink cartridge
has passed (one month has passed after
the specified expiration date).
The red LED blinks. Replace the car-
tridge generating the warning with a
new one.
The cartridge may be used until two
months pass after the specified expira-
tion date.
Expiration:2MONTH
- - - - - - - - - - - - - - - -
The expiration date of an ink cartridge
has passed (two months have passed
after the specified expiration date).
Replace the cartridge generating the
warning with a new one.
INK REMAIN ZERO
- - - - - - - - - - - - - - - -
Remaining amount of ink in an ink car-
tridge is zero.
Replace the cartridge generating the
warning with a new one.
!WasteTANK FULL/NONE
The waste ink tank is full or has not
been installed.
Check the waste ink tank.(See 4-43)
!NearFULL WASTE TANK
The waste ink tank is nearly full. Replace the waste ink tank with a new
one. (See 4-43)
!Wash Liquid END
The cleaning liquid cartridge is empty. Replace the cleaning solution cartridge
with a new one.
!WashLiquidCart.NONE
The cleaning liquid cartridge has not
been installed.
Install the cleaning solution cartridge.
!WRONG WASH CART.
There is trouble with cleaning liquid
cartridge.
Check the cleaning solution cartridge.
!Flush.BOX CLEANING
The time for cleaning the flushing box. Perform the cleaning operation of the
flushing box. (See 4-45)
!NearExcg. Flush.BOX
Time to replace the flushing box will
soon come.
It can be used continuously, but when
replacement time comes after using, it
becomes local mode every time of
printing a data and stops the operation.
!Flush.BOX EXCHANGE
Time to replace the flushing box has
come.
Replace the flushing box. Contact your
local distributor to call for service.
! NearExcg. FboxFILRTER
When Sublimation transfer ink is used,
the time for replacement of the filter on
the flushing box is approaching.
It is recommended to replace the filter.
!NCU is separated.
There is a problem with the NCU.
It appears when any trouble detected
turning the power on, even when
[NCU]-[NOZZLE CHECK] is off.)
On the [NCU]-[COND.INDICA-
TION] display, check the current error
in the NCU.
Operation can be resumed after turning
off the nozzle missing detection func-
tion.
∗∗ Washing liquid ∗∗
∗∗ un-filling up. ∗∗
cleaning solution has not been sup-
plied.
Supply the cleaning solution.
Execute [MAINTENANCE] -
[HD.MAINTENANCE] - [Maint-
WashLiquid]. (See 4-19)
Warning message Cause Remedy