Specifications

4 Daily Maintenance
4-50
Cleaning the flushing tray
When sublimation transfer ink is used, each time when the power is put on, the following messages are
indicated. Perform the cleaning of the ink tray.
STEPS:
1 Press [] key.
The carriage moves and goes off the station.
2 Open the maintenance cover and remove
the F-BOX filter and F-BOX filter base.
3 Remove the flushing tray and clean the ink
accumulated in the tray.
 When the ink is in contact with skin or gets in the eye, immediately wash it out
completely with water.
The ink tray of the
Flush. BOX is cleaned
INK TRAY CLEANING
CANCEL < > EXEC
INK TRAY CLEANING
CANCEL < > EXEC
Flushing tray