Specifications

4 Daily Maintenance
4-48
Maintenance when using sublimation transfer ink
When you use sublimation transfer ink, the maintenance below is required in addition to the normal mainte-
nance.
 Replacing F-Box filters (See 4-48)
 Cleaning the flushing tray (See 4-50)
 Changing the time for issuing warning of flushing Box filter replacement (See 4-52)
 Displaying the warning preventing color change due to color material settling and chang-
ing the interval (See 4-52)
Replacing F-Box filters
When you use sublimation transfer ink and if the warning message below is displayed, quickly replace the
filters on the suction fan box.
If you continue to use for some time after the above warning message was indicated and the time for
replacement of the filter has come, the following warning message appears and each time one data is
drawn, the operation is switched to local mode and stopped. Stop the use and quickly replace the filters on
the suction fan box.
STEPS:
1 Make sure that the printer is in LOCAL mode, and then press the [ST.MAINT] key.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select [Sub-INK MAINTE.] by pressing the [] key and press the [ENTER] key.
 When the ink is in contact with skin or gets in the eye, immediately wash it out
completely with water.
L.1> [JV5-01]
! NearExcg. Fbox FILTER
∗∗∗∗ ERROR 145 ∗∗∗∗
F.BOX FILTER EXCHG
CONFIRMATION : ent
∗∗∗∗ ERROR 145 ∗∗∗∗
F.BOX FILTER EXCHG.
L.1> [JV5-01]
width : ∗∗∗∗mm
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
ST.MAINTENANCE
CARRIAGE OUT <ent>
7
times
ST.MAINTENANCE
WIPER WASH <ent>