Specifications

4-35
Setting periodical operations in stand-by mode [ROUTINE SETUP]
Refresh Interval while in stand-by mode [REFERSH]
Set the interval at which refreshing operation is to be performed periodically.
STEPS:
1 Make sure that the printer is in LOCAL mode, and then select [MAINTENANCE] using
the [FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select [ROUTINE SETUP] by pressing the [] key six times and press the [ENTER]
key.
3 Press the [ENTER] key.
L. ∗ >
width : ∗∗∗∗ mm
FUNCTION
MAINTENANCE <ENT>
MAINTENANCE
ST.MAINTENANCE <ent>
MAINTENANCE
ROUTINE SETUP <ent>
6
times
RefreshIntervalInThe
stand by is set up.
ROUTINE SETUP
REFRESH <ent>