Specifications

4-21
Before executing the [PUMP TUBE WASH]
Supply after discharge
9 Set a cleaning liquid cartridge according to the instruction on the display.
10The cleaning solution is supplied.
11The cleaning solution is discharged.
12Press the [END] key several times.
The printer returns to LOCAL mode.
 Either of the following displays will appear if a problem with the cleaning liquid
cartridge is detected.
Set a washing
liquid cartridge.
CARTRIDGE : none
Remove a filling
up cartridge.
There is a CARTRIDGE
Set a washing
liquid cartridge.
CARTRIDGE : END
Set a washing
liquid cartridge.
CARTRIDGE : WRONG
It is being absorbed
PLEASE WAIT
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −
It is being absorbed
PLEASE WAIT
00:30
More than 20 seconds remaining
Less than 20 seconds remaining
It'sBeingDischarged.
PLEASE WAIT
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −
Remove all washing
liquid cartridges.
There is a CARTRIDGE
It'sBeingDischarged.
PLEASE WAIT
00:30
More than 20 seconds remaining
Less than 20 seconds remaining
L. ∗ >
width : ∗∗∗∗ mm