Specifications

4-17
When the operation of the printer is to be suspended for a long time [CUSTODY WASH]
8 Fill the caps with the cleaning solution using a dropper.
9 Close the maintenance cover and press the [ENTER] key.
10Set the time to wait using the [] or [] key.
Normally set 1 minute.
11Press the [ENTER] key.
Perform the nozzle cleaning.
On completion of the nozzle cleaning, the carriage moves to above the platen.
Ink cap
Fill a cap with
washing liquid fully
Fill the liquid.
COMPLETED(NEXT) : ent
Input leaving time.
1 - 99 min
ST.MAINTENANCE
LEAVING TIME : 1 min
Input range:
1 to 99 minutes
(In steps of 1 minute)
Fill a cap while
absorption stops.
ST.MAINTENANCE
01:00
ST.MAINTENANCE
COMPLETED :ent
More than 20 seconds remaining
Less than 20 seconds remaining
ST.MAINTENANCE
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −
During The PostProc
PLEASE WAIT
During The PostProc.
PLEASE WAIT
∗Being Initialized∗
PLEASE WAIT
During The PostProc.
PLEASE WAIT