Specifications

4 Daily Maintenance
4-16
4 Pull out the wiper by holding the projections at both ends.
5 Remove the ink from the wiper and the bracket using a cotton swab dampened with
the cleaning solution.
6 After cleaning the wiper, install it in position by holding the projections at both ends.
Be careful of the direction of the wiper.
7 Press the [ENTER] key.
 Replace the wiper with a new one if it is badly soiled or curled. To replace the
wiper, terminate the work instructed here first and then follow the wiper
replacement procedure.(See 4-48)
Clean a wiper and
bracket.
WIPER CLEANING
COMPLETED(NEXT) : ent