Specifications

4-15
When the operation of the printer is to be suspended for a long time [CUSTODY WASH]
When the operation of the printer is to be suspended for a long
time [CUSTODY WASH]
When the operation of the printer is to be suspended for a week or more, use the [CUSTODY WASH] func-
tion to clean the nozzles in the heads and the ink discharge passage.
After the cleaning, store the printer properly.
STEPS:
1 Make sure that the printer is in LOCAL mode, and then press the [ST.MAINT] key.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select [CUSTODY WASH] by pressing the [] key four times and press the [ENTER]
key.
The carriage will come out of the capping station.
3 Open the right maintenance cover.
 Be sure to wear the supplied goggle and gloves. If ink settles on your skin or
gets in your eyes, immediately and completely wash them off with water. Then,
consult a doctor as soon as possible.
 If there are cartridges that are in [INK NEAR END] or [INK END] status, the noz-
zle cleaning function (ink suction) is not activated. Replace the cartridges that
are in [INK NEAR END] or [INK END] status with ones containing a sufficient
amount of ink.
 For cleaning, we recommend the use of the clean stick. If using cotton swab,
remaining lint of the cotton swab may cause printing failure.
L. ∗ >
width : ∗∗∗∗ mm
ST.MAINTENANCE
CARRIAGE OUT <ent>
4
times
ST.MAINTENANCE
CUSTODY WASH <ent>