Specifications

4-11
Cleaning the nozzle [NOZZLE WASH]
4 Pull out the wiper by holding the projections at both ends.
5 Remove the ink from the wiper, bracket and the vicinity of the wiper insertion hole
using a cotton swab dampened with the cleaning solution.
6 After cleaning the wiper, install it in position by holding the projections at both ends.
Be careful of the direction of the wiper.
7 Press the [ENTER] key.
 Replace the wiper with a new one if it is badly soiled or curled. To replace the
wiper, terminate the work instructed here first and then follow the wiper
replacement procedure. (See 4-48)
Clean a wiper and
bracket.
WIPER CLEANING
COMPLETED(NEXT) : ent