Specifications

4-9
Cleaning the wiper and ink caps [CARRIAGE OUT]
6 After cleaning the wiper, install it in position by holding the projections at both ends.
Be careful of the direction of the wiper.
7 Wipe off ink or dirt adhering to the rubbers of the caps and the wiper cover using a
cotton swab dampened with the cleaning solution.
Be careful not to leave lint of the cotton swab. Lint may cause printing failure.
8 Close the maintenance cover, and press the [ENTER] key.
After performing the initial operation, the printer returns to LOCAL mode.
Ink cap
ST.MAINTENANCE
COMPLETED :end
∗Being Initialized∗
PLEASE WAIT