Specifications

3 Printing
3-50
When both ink cartridge and MBIS1 are used
When both an ink cartridge and the optional bulk ink system (MBIS1) are set in the supply paths of the
same color, you can select the ink to be used first.
STEPS:
1 Press the [ENTER] key in LOCAL or REMOTE of the printing mode.
2 Press the [REMOTE] key.
Displays the currently supplying ink.
B : Bulk ink system (MBIS1)
C : Ink cartridge
- : Only one type is set
3 Press the [][][][] key to set the supply path and the ink to be used first.
Select the supply path : Press the [][] key.
Select the ink to be used first : Press the [][] key.
4 Press the [ENTER] key.
It enters in the LOCAL or the REMOTE mode.
Usually, when both an ink cartridge and the bulk ink system (MBIS1) are set in
the supply path of the same color, the ink in the bulk ink system (MBIS1) is
used first.
If supply path does not have both ink cartridge and the bulk ink system
(MBIS1), this function cannot be set.
Pull out the ink cartridge selected on this function or turn the power on again to
disable the setting.
ES3-INK MCYKKYCM
Sb52-INK MCYKKYCM
BULK/CART SELECT
B - -B-B-C
BULK/CART SELECT
C - -B-B-C