Specifications

3-45
Change the operation condition of the ambient temperature
Change the operation condition of the ambient temperature
If you print in the status that the temperature of the place in which the machine has installed (ambient temper-
ature) is out of the usable temperature range, ink discharging defect or changing color may occur, and it
adversely affects the printing quality.
To prevent such an adverse effect, if the ambient temperature is outside the usable range, this machine dis-
plays an error message to inform you of it.
In the initial condition, the machine displays the error message, but it continues drawing. However, you can
set the machine so that it may start drawing after the ambient temperature becomes within the usable tempera-
ture range to prevent an adverse effect on the drawing quality.
STEPS:
1 Make sure that the printer is in LOCAL mode.
If it is in REMOTE mode, press the [REMOTE] key once.
2 Select [MACHINE SETUP] using the [FUNCTION] key and press the [ENTER] key.
3 Select [ENV. TEMP.] by pressing the [] key once and press the [ENTER] key.
4 Select the operation with the [] or [] key and press the [ENTER] key.
Not wait ARR. : Only displays the error and continues drawing.
Wait arrival : Waits until the ambient temperature becomes within the usable range.
 For the details of the usable temperature range, refer to (Refer to “Available
temp. (p.1-19)” ).
 If the ambient temperature is outside the usable range, the error message
below is displayed:
 The error message is displayed:
1. When you move from the local mode to the remote mode by pressing the [REMOTE] key
2. When receiving the online data and starting drawing
∗∗∗∗ ERROR 120 ∗∗∗∗
ENVIRONMENT TEMP (LO)
∗∗∗∗ ERROR 121 ∗∗∗∗
ENVIRONMENT TEMP (HI)
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
FUNCTION
MACHINE SETUP <ENT>
MACHINE SETUP
ENV. TEMP. <ent>
MACHINE SETUP
DRY & EXHST.FAN <ent>
12
to
14
times
ENV. TEMP.
SEL : Not wait ARR.