Specifications

3-41
Printing an image
When setting to WIPING.
STEPS:
1 Make sure that the printer is in LOCAL mode.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select [SET UP] using the [FUNCTION] key and press the [ENTER] key.
When the following display is shown, press the [ENTER] key.
3 Select [AUTO CLEANING] by pressing the [] key 14 times and press the [ENTER]
key.
With [],[] keys, select CLEANING.
When cleaning method and cleaning interval are not changed, press [ENTER] key.
4 Press the [FUNCTION] key.
5 After setting [WIPING INTERVAL] with [],[] keys, press [ENTER] key.
The Default value of [WIPING INTERVAL] is 50 times.
6 Press the [END] key several times.
The printer returns to LOCAL mode.
L. ∗ >
width : ∗∗∗∗ mm
FUNCTION
SET UP <ENT>
SET UP
SELECT : TYPE 1
[1]
Print. MAINTE. <ent>
14
times
DECIDE = [ENTER]
DETAIL SET = [FUNC.]
[1]Print. MAINTE
SELECT : CLEANING
WIPING INTERVAL
10 - 9990 count
WIPING
SCAN COUNT = 0
WIPING INTERVAL
10 - 9990 count
WIPING
SCAN COUNT = 0
Twice
L. ∗ >
width : ∗∗∗∗ mm