Specifications

3 Printing
3-40
4 Press the [FUNCTION] key.
5 At this point, either of [CLEANING INTERVAL] and [CLEANING TYPE] can be selected
by pressing the [] or [] key.
6 Set the value of [CLEANING INTERVAL] using the [] or [] key. Change the display
by pressing the [] or [] key, select a type on the [CLEANING TYPE] display using
the [] or [] key, and press the [ENTER] key.
The initial value of [CLEANING INTERVAL] is 1.0 m.
[CLEANING TYPE] : SOFT, NORMAL, HARD
7 Press the [END] key several times.
The printer returns to LOCAL mode.
CLEANING INTERVAL
0.1 - 100.0m
INTERVAL : TYPE
0.1m : NORMAL
CLEANING INTERVAL
0.1 - 100.0m
INTERVAL : TYPE
0.1m : NORMAL
CLEANING TYPE
SOFT / NORMAL / HARD
INTERVAL : TYPE
0.1m : NORMAL
CLEANING INTERVAL
0.1 - 100.0m
INTERVAL : TYPE
0.1m : NORMAL
CLEANING TYPE
SOFT / NORMAL / HARD
INTERVAL : TYPE
0.1m : NORMAL
Twice
L. ∗ >
width : ∗∗∗∗ mm