Specifications

3-39
Printing an image
Maintenance while Printing
The auto cleaning or auto wiping while printing will be set.
Head cleaning or wiping will be performed while printing, preventing the defective printing in advance.
CLEANING : Cleaning of the head is automatically performed while printing
WIPING : Wiping of the head is automatically performed while printing.
OFF : No cleaning or wiping will be performed while printing.
When you set to "CLEANING", you can set the cleaning method and the interval for performing the auto-
matic cleaning:
Cleaning method : SOFT, NORMAL, STRONG
Interval : 0.1m to 00.0m (set in increment of 0.1m)
When you set to "WIPING", you can set the interval for performing the automatic wiping.
Interval : 10~9990 (set in increment of 10 scans)
When setting to CLEANING.
STEPS:
1 Make sure that the printer is in LOCAL mode.
If it is in REMOTE mode, press the [REMOTE] key.
2 Select [SET UP] using the [FUNCTION] key and press the [ENTER] key.
When the following display is shown, press the [ENTER] key.
3 Select [AUTO CLEANING] by pressing the [] key 14 times and press the [ENTER]
key.
With [],[] keys, select CLEANING.
When cleaning method and cleaning interval are not changed, press [ENTER] key.
 The cleaning function does not work when Ink-near-end is generated.
 Depending on the conditions of the heads, etc., the defective printing could not
be recovered even performing this function.
L. ∗ >
width : ∗∗∗∗ mm
FUNCTION
SET UP <ENT>
SET UP
SELECT : TYPE 1
[1]
Print. MAINTE <ent>
14
times
DECIDE = [ENTER]
DETAIL SET = [FUNC.]
[1]Print. MAINTE
SELECT : CLEANING