Specifications

6-23

Invoking NCU functions

This function is available only when the machine is equipped with the optional nozzle check unit (OPT-

J0218).

List of functions

This section describes briefly the NCU functions and their setting values.

Setting a NCU functions

The operation described below on the operation panel is required to execute NCU functions.

STEPS:

1 Make sure that the printer is in LOCAL mode, and then select [NCU] using the [FUNC-

TION] key and press the [ENTER] key.

If it is in REMOTE mode, press the [REMOTE] key once.

2 Select an NCU function and make setting.

Name Function

Page in this

manual

NOZZLE CHECK Set whether or not to perform nozzle missing detection. P.6-24

NG ACTION (*1)

Set the operation of the printer to be performed in case the preset number of

or more missing nozzles are detected and thus NG judgment is made. (*2)

P.6-24

NG JUDGEMENT (*1) Set the number of missing nozzles for NG judgment. (*2) P.6-25

COND.INDICATION Displays the status of the NCU. P.6-25

 NG (*1): Bad nozzle condition.

 NG (*2): One or more bad nozzles have been located on print head.

L. ∗ > [JV5-01]

width : ∗∗∗∗ mm

FUNCTION

NCU <ENT>