Specifications

6 Operation for Functions
6-20
CART. PRIORITY
You can select the cartridge status to use first with the double cartridge function of ink supply.
Available setting values : [INK LEVEL, EXP. DATA] (Default: INK LEVEL)
When INK LEVEL is selected
First use the cartridge of less remaining amount of ink.
When EXP. DATA is selected
First use the cartridge whose expiration date is coming sooner.
Test Draw Arrange
You can set the placement direction of the drawn test pattern when performing test drawing repeatedly.
Available setting values : [FEED DIR., SCAN DIR] (Default: FEED DIR.)
When FEED DIR. is selected
When test pattern is drawn repeatedly, place the test pattern in the FEED direction.
When SCAN DIR. is selected
When test pattern is drawn repeatedly, place the test pattern in the SCAN direction.
MACHINE NAME
When the printer is connected through the USB 2.0 interface to a system to which two or more machines
are connected, set the identifier of the printer to have the system recognize it.
As a machine name, enter only the printer number in the form [JV5 - ∗∗ (printer number) ].
Available setting values: [01 ~ 99] ( Default: 01)
Ambient temperature
Set the operation when drawing was tried to start with the temperature (ambient temperature) of the place
where this machine has been installed being outside the range of usable temperature.
Setting value: [Not wait ARR., Wait arrival] (Default: Not wait ARR.)
When selecting [Not wait ARR.]
Only displays the error and continues drawing.
When selecting [Wait arrival]
Displays the error, waits until the ambient temperature becomes within the usable range and then starts
drawing.