Specifications

6-17
Invoking MACHINE SETUP functions
Outline of the machine setup functions
REAR MIST FAN
Sets the operation of the rear mist fan.
STOP TIMER
Sets time from drawing has completed to the fan stops.
Available setting values : [CONTINUE, 0 ~ 240min] (Default: 120min [unit 10min.])
If this is set to [CONTINUE], the fan will always operate.
RENEW
Switches the fan operation. (Depending on the setting, operates the fan motor.)
Available setting values : [ON , OFF]
Setting contents will not be saved.
Rear mist fan operates during drawing and from drawing has completed, it operates depending on the setting
of the stop timer.
Feeding / TakeUP
UNIT SELECT
For heavy-duty feeding / take-up device, set whether to use or not to use.
Available setting values: [ON, OFF]
Aftter switching ON to OFF, move the tension-bar of each device to the lock position.
Especially for heavy-duty take-up device, you cannot switch the setting unless moving the bar to the lock position.
Tension Bar-POS.
Switches the setting of the tension bar position.
Available setting values : [LOW , HIGH] (Default: LOW)