Specifications

6-9
Invoking SET UP functions
PRIORITY
Concerning the following setup functions, select whether priority is given to the settings made on the
printer or to the designation from the host.
[MEDIA COMP.] , [HEATER] , [PRINT MODE] , [INK LAYERS] , [DRYING TIME] , [PRE-FEED] ,
[MARGIN] , [COLOR PATTERN] , [REFRESH] , [FD.SPEED]
Available setting values: [INDIVIDUALLY, ALL HOST, ALL PANEL]
The setting values for each user type are stored separately from those for other user types.
Even when setting has been made to give priority to the host, the settings made on the printer become
effective if there is no instruction from the host.
AUTO CLEANING
(Refer to the Chapter 3 “Automatic cleaning” of the JV5-320S Operation Manual.)
Set whether or not to clean the heads automatically before printing.
Available setting values: [ON, OFF]
The cleaning will be performed prior to the first printing after the printer is put on. Subsequently, the clean-
ing is made for each meter of drawing prior to each drawing.
The detail setting menu is displayed by pressing the [FUNCTION] key during automatic cleaning ON/OFF
selection.
CLEANING INTERVAL
Set the interval at which cleaning is to be performed periodically during printing.
Available setting values: [10 ~ 30000 mm] ( Default: 1000 mm)
CLEANING TYPE
Set a type of automatic cleaning.
Available setting values: [SOFT, NORMAL, HARD]
The setting values for each user type are stored separately from those for other user types.
Maintenance while printing
(Refer to the Chapter 3 "Maintenance while Printing" of the JV5-320S Operation Manual.)
While printing, set whether to perform automatic cleaning or wiping the heads.
Available setting values: [CLEANING , WIPING , OFF]
Cleaning will be performed at a movement interval as a unit after starting each drawing.
When cleaning is selected, the details setting menu is obtained with [FUNCTION] key.
Wiping will be performed at each scanning times as a unit after starting each drawing.
When wiping is selected, the details setting menu is obtained with [FUNCTION] key.
The setting values for each user type are stored separately from those for other user types.
INDIVIDUALLY For each function, set whether priority is given to the printer or to the host independently.
ALL HOST For all the functions, priority is given to the settings on the host.
ALL PANEL For all the functions, priority is given to the settings on the printer.