Specifications

6 Operation for Functions
6-8
COLOR PATTERN
Sets whether you draw the nozzle missing check pattern on both edges of the media respectively.
Available setting values for right edge: [ON, OFF]
When the pattern is to be printed, the printing location of image data is shifted by 18 mm from the origin in
the scanning direction.
The setting values for each user type are stored separately from those for other user types.
Check pattern
Available setting values for left edge: [OFF, ONx1 to ONx5]
The pattern can be printed with ONx1 to ONx5 and can be changed the width of the pattern.
The setting values for each user type are stored separately from those for other user types.
Check pattern
REFRESH
Set the head refreshing level (running flush interval).
Available setting values: [0 ~ 3] ( Enhancing the level shortens the interval)
The setting values for each user type are stored separately from those for other user types.
DRYNESS FAN
Sets the strength of the rear surface dryness fan.
Available setting values: [STRONG, STANDARD, Little WEAK, WEAK, OFF]
The setting values for each user type are stored separately from those for other user types.
6-color mode4-color mode
Origin
Image
18 mm
28 - 34mm (ONx1)
84 - 90mm (ONx5)
Dead space
Image