Specifications

6 Operation for Functions
6-4
Outline of the setup functions
MEDIA FEED
Set particulars related to media feed.
The table below shows the setting items.
COMPENSATION
Compensates the feeding amount of the media when you replaced the media type or when you changed the
heater temperature without fail.
Available setting values: [-255 to 255]
SPEED SWITCHING
Set the feed speed level.
Available setting values: [200% ~ 10%]
The setting values for each user type are stored separately from those for other user types.
HEATER (See P.6-28)
Make settings of the pre-heater and post-heater built in the platen.
PRINT MODE
Sets various conditions of printing.
DRAFT quality
Set a desired print quality in DRAFT mode (540 dpi resolution in the Y-axis direction).
Available setting values: [STD., FINE, FAST]
Press the [FUNCTION] key while the quality item is selected. Then the printer permits setting the number
of passes for every resolution and setting high-speed printing ON/OFF.
The table below shows the combinations of the elements that can be set.
COMPENSATION Compensates the feeding amount of the media.
SPEED SWITCHING Sets the media feed rate.
Resolution in
DRAFT mode
4 colors 6 colors
DRAFT quality
Passes
High-speed
printing
Passes
High-speed
printing
540x720 dpi
4
ON / OFF 8 ON / OFF FAST
8
ON / OFF 16 ON / OFF STD.
16
ON / OFF 32 ON / OFF FINE
540x900 dpi
10
ON / OFF 10 ON / OFF FAST
20
ON / OFF 20 ON / OFF STD.
40
ON / OFF 40 ON / OFF FINE
540x1080 dpi
6
ON / OFF 12 ON / OFF FAST
12
ON / OFF 24 ON / OFF STD.
24
ON / OFF 48 ON / OFF FINE
Table 6-1 : Element that can be set in DRAFT quality mode