Specifications

6 Operation for Functions
6-2
Functions Invoked by [FUNCTION] Key
The following five types of functions can be invoked by pressing the [FUNCTION] key.
Invoking SET UP functions
Registering printing conditions in a lump (type registration)
FUNCTION mode provides 16 setup functions.
The setting value of each of the 15 functions other than SETUP RESET can be registered as any of the fol-
lowing four types.
If the types are registered for different kinds of media, respectively, printing conditions can be easily
changed when the media is replaced with another kind of media.
Example of type registration
List of functions
This section describes briefly the setup functions and their setting values.
Function name Description
Page in this
manual
SET UP Make various settings concerning print quality. P.6-2
MAINTENANCE
Maintenance functions are to be executed to keep the printer in good condi-
tion.
P.6-11
MACHINE SETUP Display various information of the printer or set time or units of measure. P.6-15
NCU
*1
*1. "NCU" can be used only when the optional nozzle check unit (OPT-J0218) is mounted.
Set operations concerning the nozzle missing detection function. P.6-23
DISPLAY Set a language to be used with the printer. P.6-26
Type 1 Media 1 for soft sign
Type 2 Media 2 for soft sign
Type 3 Transfer paper 1
Type 4 Transfer paper 2
Name Function
Page in this
manual
MEDIA FEED. Corrects the feed rate of media P.6-4
HEATER Sets heater conditions P.6-4
PRINT MODE Sets a print quality level and printing direction P.6-4
INK LAYERS Sets the number of layers in which ink is to be applied P.6-6
DRYING TIME Sets the time to wait for ink drying P.6-6
PRE-FEED Feeds the media back and forth before printing P.6-7
MARGIN Sets a non-printing area along the right and left edges of the media P.6-7
COLOR PATTERN Draws color patterns on both edges of the media. P.6-8
REFRESH Refreshes the print heads during printing P.6-8