Specifications

3-11
Setting the media on the printer
5 Press the [] [] keys to move the carriage to the
right edge of the media and press the [ENTER] key.
Align the drawing origin arrow of the head cover with the right
edge of the media.
Press the [ENTER] key to determine the right edge of the media.
6 Press the [] key to terminate the media detection.
Determining the right edge of the media sets the left edge of the media automatically.
(The position moving to the left from the right edge of the media by the media width entered in the Step 4 will
become the left edge.)
 In the Step 6, you can fine adjust the media left edge position.
1. Press the [] key in the Step 6.
2. Press the [] [] keys to move the carriage to the left edge of the media.
3. Align the drawing origin arrow of the head cover with the left edge of the media.
4. Press the [ENTER] key to determine the media left edge position.
Drawing origin arrow
Media
Entry of right edge
[ < ] or [ > ] key hit
When the media left
edge is CONF. [<] hit
adjust < > finish