Specifications

3-5
Setting the media on the printer
3 Check that the height of the platen sheet metal is
same as that of the platen sheet metal holder.
If the platen sheet metal is higher, the reasons may be:
• The platen sheet metal is placed on the screw of the platen sheet
metal holder.
• The projection of the platen sheet metal R does not enter into the
hole of the platen sheet metal holder.
In the above cases, attach the platen sheet metal again.
Remove the platen sheet metal
1 Hold rectangular holes on two positions on the platen sheet metal concurrently and
remove it quietly.
2 Wipe ink blot adhering on the removed platen sheet metal with soft cloth or paper
towel.
If ink blot adheres to the platen sheet metal, wipe ink blot with paper towel immersed in cleaning liquid for
maintenance.
3 Place the platen sheet metal (L/R) on the platen sheet metal storage located on the
machine and store them.
Platen sheet metal RPlaten sheet metal L
Platen sheet metal holder
Platen sheet metal (L/R)
Platen sheet
metal storage
Notch of platen
sheet metal R
Place notch on.