Specifications

2 Before Use
2-14
HD.MAINTE-
NANCE
FILL UP INK
Refer to the Chapter 3 of the JV5-320S
Operation Manual.
The heads are charged with ink.
Use this function if nozzles are not
unclogged by [CLEANING] and
[NOZZLE WASH].
DISCHARGE&WASH
Refer to the Chapter 5 “If nozzles are
still clogged even after head cleaning” of
the JV5-320S Operation Manual.
Discharges ink from the heads,
dampers and ink tubes, and washes
them with an cleaning solution car-
tridge (option).
MaintWashLiq-
uid
Refer to the Chap-
ter 4 “Before exe-
cuting the [PUMP
TUBE WASH]” of
the JV5-320S Oper-
ation Manual.
FILLING UP Supplies the cleaning liquid for the
wiper and pump tubes.
DISCHARGE Discharges the cleaning liquid for
the wiper and pump tubes.
FLUSHING BOX CLEANING COMP. To be performed in order to let the
equipment recognize that the clean-
ing of the flushing box has been per-
formed.
BOX EXCHANGE LV 5/5 to 1/5 Changes the time for cleaning or
replacing of flushing box.
FILTER EXCHANGE LV 5/5 to 1/5 Changes the time for replacing the
filter on the flushing BOX. (This
function is available only when the
machine is equipped with the nozzle
check unit (option).)
DROP.POScorrect
Refer to the Chapter
3 of the JV5-320S
Operation Manual.
PATTERN 1 to 4 -40.0 to 40.0 dot Correct the difference in the ink fall
points between outward trip and
homeward trip. When the media
thickness, head height or ink type is
changed, dot positions may be
slightly in misalignment. This func-
tion corrects the dot positions to
ensure that the accurate printing
result is obtained.
Print two test patterns at the standard
speed and at a high speed, respec-
tively. Then compare the ink fall
points of outward trip and those of
homeward trip and correct dot posi-
tions.
PG DROP
ADJUST.
Refer to the Chapter
3 of the JV5-320S
Operation Manual.
PATTERN 1 to 8 -40.0 to 40.0 dot Set the reference value for correct-
ing the misalignment of the ink fall
points between outward trip and
homeward trip in bi-directional
printing when the head gap has been
changed.
Function name Sub function Setting value Function