Specifications

3 In Case of Trouble
3-2
Error messages and solutions
Error messages and solutions for printing on both sides are as follows.
Error message Occurrence time Causes and solutions
∗∗∗∗∗ ERROR 11 ∗∗∗∗∗
PARAMETER ERROR
Occurs when printing on back side
with a wrong setting or data.
 Check RIP or the setting of the main
unit.
∗∗∗∗∗ ERROR 217 ∗∗∗∗∗
DBL-SIDE ORG. MARK
Occurs when double side printing ori-
gin cannot be detected.
 Set media so that the origin passes
on the sensor for double sided print-
ing.
∗∗∗∗∗ ERROR 10 ∗∗∗∗∗
CMD (DBL.Side:FRONT)
Occurs when JV5 main unit is unable
to print on front side.
 Check the condition of JV5 main
unit.
∗∗∗∗∗ ERROR 10 ∗∗∗∗∗
CMD (DBL.Side:BACK)
Occurs when the printer receives the
data other than the back side when
Back sided printing mode is ON.
 Check the setting of the printing
data.