Specifications

2-13
Print image data
7 Start printing.
Right-click the image to print, select [RIP and Print] or others, and start printing.
When printing on back side, the following settings are fixed.
Setting Fixed value
Right and left margin (in the effective print area) 0 mm
Color pattern OFF
Setting of crosswise origin by jog key invalid
Stamp OFF
Setting of media feed Normal
Pre-feed OFF
 Back side is printed by the following mode.
(You can check this setting at [Print condition] of Raster Link Pro III.)
4-color ink set: 360 x 360, 1 pass
6-color ink set: 360 x 360, 2 pass
If other modes are set, JV5-320S displays parameter error, and it does not print
with specified size.
(When it is OFF, this printer prints by fixed mode (720x720, 8pass) if printing
from Raster Link Pro III.)