Specifications

2-3
Printing area
Printing area
The following is the effective printing area for double sided printing with this unit.
Data is printed on the effective area.
In the area enclosed in dotted line, several lines are printed to align the printing position of the front and the
back.
 When printing on double side, media stretch detection lines (50mm) and a mar-
gin (20mm) are automatically added.
Therefore, the printable width of data is the area less the sum of the width
above (70mm).
 To print on back side, a length of 1500 mm or more is necessary from the front
edge to the cutting line of the media.
Be careful to use a cut sheet media.
(For a necessary length to cut off the media after printing on front side, see
p. 2-
8
.)
F
150 mm
20 mm
Roll: 0 mm
Leaf: 200 mm
320 mm
Cutting line
25 mm
Media stretch detection line
(50 mm)
25 mm
Area where lines are printed
(area in dotted line)
Effective print area
Common for Roll/Leaf media
Feed direction
1500 mm or more