Specifications

3-25
Setting the media on the printer
4 At the back of the printer, position the left roll holder.
1.Loosen the roll holder securing screw on the left.
2.Position the roll holder aligning the center of the media to the center of the printer, and tighten the screw.
Inside diameter of the paper core is 2 inches or 3 inches.
5 Set the roll media to the left roll holder.
Set the roll media to the roll holder until the paper core is fixed.
6 Adjust the position of the right roll holder.
Loosen the roll holder securing screw on the right, and insert the right roll holder into the end of paper core.
Tighten the screw.
 Supporting the media with the media support bar, it can be set easily.
Roll holder
securing screw
Media support bar