Specifications

3 Printing
3-24
[1] Set media to the roll holder on the back
STEPS:
1 Set the operation panel.
1.Select [MACHINE SETUP] with [FUNCTION] key and press the [ENTER] key.
2.Select [ Feeding/TakeUP] with JOG key [
] [] and set OFF each.
2 Lift tension-bars up on both sides of the printer, and fix with the locks.
Locks are on the right front and left back of the printer. The back lock is shown below.
3 Push the front clamp lever up, and open the front cover.
FUNCTION
MACHINE SETUP <ENT>
FEEDING : TAKE-UP
OFF : OFF
MACHINE SETUP
Feeding/TakeUP <ENT>
Lock
Tension-bar (Grip this part)
Clamp
Lever