Specifications

3-21
Setting the media on the printer
14With switches of the heavy-duty take-up device, roll up the media about once.
1.Turn the left switch to MANUAL and the right switch to the the take-up direction of the media to roll up the
media.
2.Just before the media stretched tight, turn the left switch to AUTO to stop.
15Press the JOG key [] [] again to loose the media.
Loosen the media until it reaches to the floor.
16At the front, lift the tension- bar down slowly.
 Rolling up the media too tight, covers of take-up device opens and an error
[Cover Open] appears.
In this case, open the right cover of the take-up device, and loosen the tension
of the media.
Face out
Face in