Specifications

3 Printing
3-16
[3] Adjust the media
Adjust the media to start printing.
STEPS:
1 Open the front cover.
If the front clamp lever is pushed down, push it up.
2 Slide the media from the back to the front.
Insert the roll media between the platen and pinch roller, and slide the media to the front.
3 At the back of the printer, push the clamp lever down.
The front clamp lever automatically lowers, and the media is temporary set.
Clamp
Lever
Platen
Pinch Roller
Clamp
Lever