Specifications

3 Printing
3-14
4 Fix heavy-duty roll holders to the media.
1.Slide the paper core to the center of the roll shaft.
Align the center of the paper core to a scale of the media set label (See 2-3).
2.Push both sides of the heavy-duty roll holders into the media, and tighten screws with supplied ratchet handle
to fix.
3.Loosen lock screws (2 places) of heavy-duty roll holder on the adjuster side.
4.Tighten adjust screws (2 places) until the media and the heavy-duty roll holder do not run idle.
 Set media in the center of the printer.
Good: Media is set on the center Not good: Media is set on the right
Tighten and fix
Lock screw
Adjust screw