Specifications

3-11
Setting the media on the printer
2.Loosen lock screws (2 places) of heavy-duty roll holder on the adjuster side.
3.Tighten adjust screws (2 places) until the core and the heavy-duty roll holder do not run idle.
4.Tighen lock screws (2 places) to fix.
5 Set the roll shaft on heavy-duty take-up device, and close the covers on the right and
left sides of the roll shaft.
Next, set media to the feeding side. Go on to the next page.
Lock screw
Adjust screw
Lock screw
Cover