Specifications

2 Before Use
2-32
DROP.POScorrect
(p. 3-52)
PATTERN 1 to 4 -40.0 to 40.0 dot Correct the difference in the ink fall
points between outward trip and
homeward trip. When the media
thickness, head height or ink type is
changed, dot positions may be
slightly in misalignment. This func-
tion corrects the dot positions to
ensure that the accurate printing
result is obtained.
Print two test patterns at the standard
speed and at a high speed, respec-
tively. Then compare the ink fall
points of outward trip and those of
homeward trip and correct dot posi-
tions.
PG DROP
ADJUST.
(p. 3-43)
PATTERN 1 to 8 -40.0 to 40.0 dot Set the reference value for correct-
ing the misalignment of the ink fall
points between outward trip and
homeward trip in bi-directional
printing when the head gap has been
changed.
SLEEP SET UP REFRESH
(p. 4-28)
REFRESHinter-
val
OFF, 1 to 168 h While the power switch is off, the
printer performs refreshing opera-
tion at fixed intervals to prevent ink
clogging or the like.
Set the interval (in hours) at which
refreshing operation that discharges
ink from the heads is to be per-
formed.
TUBE WASH
(p. 4-29)
WASH I NTER -
VA L
OFF, 1 to 168 h Set the interval (in hours) at which
pump tube cleaning operation is to
be performed.
CLEANING
(p. 4-30)
CLEAN. INTER-
VA L
OFF, 1 to 168 h Set the interval (in hours) at which
cleaning operation is to be per-
formed.
CLEAN. TYPE Normal, Soft, Hard Set a type of cleaning.
Function name Sub function Setting value Function