Specifications

2-31
About Function Menus
MAINTENANCE functions
Function name Sub function Setting value Function
ST.MAINTE-
NANCE
CARRIAGE OUT
(Can be selected directly by pressing
[ST.MAINT] key.) (p. 4-7)
Move the carriage when cleaning the
inside of the station and replacing
consumables.
Do not move the carriage out of the
capping station by hand. Select the
[ST.MAINTENANCE] - [CAR-
RIAGE OUT] to move the carriage.
WIPER EXCHANGE [ST.MAINT]
(p. 4-46)
When the display shows that the
wipers must be replaced, perform
this operation and replace the wip-
ers.
NOZZLE WASH [ST.MAINT]
(p. 4-10)
Washes the nozzles with a cleaning
kit to correct nozzle clogging and jet
deviation.
DISWAY WASH [ST.MAINT]
(p. 4-13)
Washes the ink discharge passages
(pump tubes) to prevent their clog-
ging.
CUSTODY WASH [ST.MAINT]
(p. 4-15)
When the operation of the printer is
to be suspended for more than one
week, wash the nozzles in the heads
and ink discharge passages and
make arrangements for storage.
WIPER WASH [ST.MAINT]
(p. 4-24)
Washes the ink suction pumps.
PUMP TUBE WASH [ST.MAINT]
(p. 4-22)
Washes the wiper.
CR.MAINTENANCE (p. 4-26) Move the head unit to the left end of
the printer and perform maintenance
of the heads and related parts.
HD.MAINTE-
NANCE
FILL UP INK (p. 3-48) The heads are charged with ink.
Use this function if nozzles are not
unclogged by [CLEANING] and
[NOZZLE WASH].
DISCHARGE&WASH (p. 5-6) Discharges ink from the heads,
dampers and ink tubes, and washes
them with an cleaning solution car-
tridge (option).
MaintWashLiq-
uid (p. 4-19)
FILLING UP Supplies the cleaning liquid for the
wiper and pump tubes.
DISCHARGE Discharges the cleaning liquid for
the wiper and pump tubes.
FLUSHING BOX CLEANING COMP. (p. 4-42) To be performed in order to let the
equipment recognize that the clean-
ing of the flushing box has been per-
formed.
BOX EXCHANGE LV (p. 4-39)
5/5 to 1/5
Changes the time for cleaning or
replacing of flushing box.