Specifications

2 Before Use
2-12
Cutter blade and cutting line
The carriage is provided with a cutter unit for cutting off the media that has been printed on.
The cutter cuts off the sheet of media along the cutting line on the platen. (Refer to “Cutting the media
after completion of printing (p.3-59)” ) , (Refer to “AUTO CUT (p.6-9)” )
Media sensor
The media sensor detects the presence of the media and the media length.
This printer has two media sensors on the platen (in the rear).
 Set the media so that more than one media sensor located in the rear of the
platen is covered with the media without fail. The media can not be detected
unless it is placed over the sensor.
Cutter blade
Cutting line
Cutter unit
Media sensor
Media sensor